CBE BDS180
Official technical documentation and workshop diagnostics for BDS180.
Master Troubleshooting & Diagnostics Matrix
| Error Code / Indicator | Symptom / Meaning | Step-by-Step DIY Fix | Suggested Actions |
|---|---|---|---|
Operational Fault | Faulty battery Possible Cause: The device has detected a short-circuit on the connected battery or that it has completely exhausted its capacity. | The device isolates the damaged battery and signals the anomaly with long blinks on the corresponding LED on the BDS180 and on the MC-180 control panel. The batteries can be reset manually by turning the device off and on again. | DIY Safe |
Operational Fault | Battery protection function activated Possible Cause: The battery voltage dropped below 9.5V. | The battery protection function disconnects all users when the voltage drops below 9.5V to avoid irreversible damage. If the voltage does not rise above 9.5V, the power supply is guaranteed for up to 1 minute; if it drops below 8.5V, the device turns off automatically. The batteries can be reset manually by turning the device off and on again. | DIY Safe |